Haan GS-30 - Manual (Page 20)

Troubleshooting
This chapter summarizes the most common problems you
could encounter with your HAAN
®
Garment Steamer. Please
read the different sections for more details. If you are unable
to solve the problem, or have any questions not answered in
this manual please contact a Customer Care Representative
at 877-HAAN DIRECT (877-422-6347).
PROBLEM: Garment Steamer does not operate.
Possible Cause:
1) Power cord not firmly plugged into outlet.
2) No power in wall outlet.
Possible Solution:
1) Check plug in outlet and set plug firmly.
2) Check fuse or breaker. Replace fuse and/or
reset breaker.
PROBLEM: Garment Steamer does not emit steam or the
flow of steam has decreased.
Possible Cause:
1) No water in water tank.
Possible Solution:
1) Add water to the water tank following the
instructions on page 12.
PROBLEM: The hose makes a gargling noise and water
droplets have collected on the wand or
steam head.
Possible Cause:
1) If the hose is used for a substantial time in
a bent state, a gargling noise is emitted and
water droplets collect in the wand.
Possible Solution:
1) Extend the hose upward so it is no longer
bent and hold in this position for 2-3
seconds to allow the condensation to clear
within the hose and clear the passageway
for the steam.
pg 18 877-HAAN DIRECT / 877-422-6347 www. HAANUSA.com