Hyundai MWEGH 281S - Manual (Page 51)

EN
EN - 1
CONTROL
CLOCK SETTING
When the microwave oven is electrified,the oven will display “ 0:00“, buzzer will ring once.
1. Press “ CLOCK/PRE - SET”, the hour figure flash.
2. Turn ” ” to adjust the hour figures, the input time should be within 0 - 23.
3. Press “ CLOCK/PRE - SET”, the minute figures will flash.
4. Turn ” ” to adjust the minute figures, the input time should be within 0 - 59.
5. Press “ CLOCK/PRE - SET” to finish clock setting. “:“ will flash.
Note:
1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press “ STOP/CLEAR“,
the oven will go back to the previous status automatically.
MICROWAVE COOKING
Press the “ MICROWAVE“ key once, and “P100“ display. Turn ” ” to select the microwave
power from 100% to 10%. “P100“, “P80“, “P70“, “P60“, “P50“, “P40“, “P30“ “P20“, “P10“ will
display in order.
Press ” MICROWAVE“ to confirm.
Turn ” ” to adjust the cooking time. (The time setting should be 0:05- 95:00.)
Press ” START/QUICK COOK“ to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0 - 1 min. : 5 seconds
1 - 5 min. : 10 seconds
5 - 10 min. : 30 seconds
10 - 30 min. : 1 minutes
30 - 95 min. : 5 minutes
11 power levels are available.
Level 10 1 0
Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
Display P100 P90 P80 P70 P60 P50 P40 P30 P20 P10 P00
1)
2)
3)
4)
5)
6)