haier XPB56-23S - Manual (Page 11)

STANDARD
Washing sequence
Figure 1
Figure 2
Figure 4
Spin timer Wash timer Wash selector Water-filling entrance
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
Using process Using process
(Standard current,
strong current)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Wash
DRAIN
DRAIN
STRONG
STRONG
STANDARD
WASH SELECTOR
WASH SELECTOR
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries.
(Figure 3)
5.After washing, set the "WASH
SELECTOR" at "DRAIN". (Figure 4).
DRAIN
STRONG
STANDARD
SPIN TIMER WASH TIMER
WASH SELECTOR
WATER-FILLING ENTRANCE
OFF
OFF
9 3 3
Figure 3
WASH TIMER
OFF