Switching the information display mode, Display when recording an image of yourself – Hitachi DZ-HS300A User Manual
Page 49
E
ngli
s
h
49
●Switching the information display mode
You can switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
•
Full display mode:
All types of information will
appear.
•
Minimum display mode:
The recording mode (see
1 on page 46) and recording status (see 11 on
page 46) will appear. If the DVD video camera/
recorder has warning information, a warning message will appear.
Note
:
The DVD video camera/recorder does not record the date and time as a part of image. However, this information
during recording will be recorded with image as data which can be checked on Disc Navigation screen during
playback (see “INFORMATION DISPLAY DURING RECORDING” on page 46).
●Display when recording an image of yourself
When recording with the LCD screen facing the same direction as the
lens, the operating status will appear: The battery remaining level will
appear only when the remaining level is very low, and the display will
blink.
No warning/message (see page 46) will appear when recording with the LCD screen facing the same
direction as the lens.
Instead, the following screen display symbols will blink to inform you of the operation status of
DVD video camera/recorder.
When the LCD monitor is turned 180º from the position with the LCD screen facing the same
direction as the lens, the warning/message can be checked.
DISPLAY
Operating status/warning message
Battery remaining level