Hitachi DZ-HS300A - Manual (Page 18)

E
ngli
s
h
18
Names of Parts
1 Flash (for DZ-HS303A only) (p. 59)
2 Light receiving sensor
(for DZ-HS303A only)
This sensor controls the amount of light to be
emitted from the built-in flash. Take care not
to block with hand, etc. during recording.
3 Lens cap string attachment hole (p. 23)
4 Stereo microphone
Take care that the microphone is not blocked
by a hand, etc., during recording.
5 Recording indicator (p. 37, 43, 68)
The red indicator will light during recording.
6 Infrared receiver
(for DZ-HS303A only) (p. 24)
When the remote control is used to operate
the DVD video camera/recorder, this
receiver will receive the infrared signal.
7 Optical 10× zoom lens
(for DZ-HS303A only)
Optical 25× zoom lens
(for DZ-HS300A only)
(p. 53)
8 Lens hood (p. 54)
Always remove this lens hood when using
the optional tele-conversion or wide-
conversion lens.
9 Zoom lever (p. 53, 55, 73)
To adjust the zoom or volume.
10 Accessory shoe (for DZ-HS303A only)
(p. 59)
The optional video flash can be attached
here. (See the instruction manual of device to
be attached for details.)
11 PC connection terminal (TO PC) (p. 123)
12 AV inout/output jack (p. 112, 115)
13 External microphone jack (for DZ-HS303A
only) (p. 70)
14 Wide-screen color liquid crystal display
(inside) (p. 34)
14
12
6
7 8
9
(Inside the cover)
11
2 3 4 5 1
13
10
Although the external appearances of DZ-
HS303A and DZ-HS300A are different, the
method of operating these models is identical.
DZ-HS303A illustrations are used in this
manual.