beautypg.com

Product features – Harbor Freight Tools 94434 User Manual

Page 6

background image

SKU 94434

For technical questions, please call 1-800-444-3353

PAGE 6

chemicals are: lead from lead-based paints, crystalline silica from bricks and ce-
ment or other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles. (California Health & Safety
Code 25249.5, et seq.)

WARNING! People with pacemakers should consult their physician(s) before using
this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference or failure of the pacemaker. In addition, people with pacemak-
ers should adhere to the following: Avoid operating power tools alone. Don’t use a
power tool with the power switch (Trigger) locked on. If powered via a power cord
be certain that the tool is properly grounded. A ground fault interrupt (GFCI) sys-
tem is also a good precaution. This inexpensive device is a good safety measure
because it prevents a sustained electrical shock. Properly maintain and inspect all
tools before use to avoid electrical shock.

WARNING! The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.

PRODUCT FEATURES

NOTE: For additional information regarding the parts listed in the following pages, refer to
the

Assembly Diagram on page 12.

CHARGED

INDICATOR

CHARGING
INDICATOR

CHARGER

POWER CORD

CHARGER

(26)

FIGURE A

TRIGGER

(19)

CHUCk

TORQUE

SELECTOR RING

BATTERY PACk

(22)

AUxILIARY

HANDLE

DEPTH

GAUGE

WARNING! Always make sure the Trigger of the Cordless Drill is in its “OFF”

position, the Battery Pack (22) is removed from the Cordless Drill, and the Charger

16.

17.

1.