Harbor Freight Tools 47274 - Manual (Page 2)

SKU 47274 For technical questions, please call 1-800-444-3353. Page 2
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids. Do not spray near open
flames, pilot lights, or any other heat source. Do not smoke while working with
spraying tools. Always work in a well ventilated area. Paints, sealers, stains and
thinner emit toxic fumes and are extremely flammable.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Power Supply 110 V, 60 Hz, 80 Watts
Container Capacity 33 Ounces
Maximum Pressure 1450 PSI / 100 Bar - Flow Rate = 5.1 GPH
Maximum Viscosity 30 (Seconds) Refer to page 5 (test).
Handle Length 5 Inches
Gun Dimensions 9-1/2” H x 4-1/2” W (weight = 3 Lbs.)
Accessories: Viscosity Cup with hanger/ Four Nozzle Tips including 2 - .032”,
1 - .021”, 1 - Extended Tip - .021”, / Angled Nozzle Adapter (50 Degree)
E222975
REV 08/06