Harbor Freight Tools 65040 - Manual (Page 6)

SKU 65040 For technical questions, please call 1-800-444-3353. Page 6
Remove Tank Cap from Container.
Make sure Filter is clear of dirt and
debris. Refill Container with liquid,
and replace Cap. Pump Arm to pres-
surize system and continue spraying.
To attach Extension Arm (57), make
14.
sure the end has the rubber sealing
gasket in place. If not, use a gasket
from the spare parts bag and insert
into end of Extension Arm.
Fasten Extension Arm to Spray Head
15.
Nut (53) until tight. Adjust Extension
Arm to desired length.
When finished spraying, depressurize
16.
system. Remove Cap and empty re-
maining liquid into secure container.
Clean the Sprayer thoroughly with
17.
agents recommended by the chemi-
cal manufacturer. Allow the unit to
air-dry. Replace the Cap (23), and
store the Sprayer in a clean, dry, safe
location out of reach of children.
Note:
18. If the Sprayer is not used for
a long period of time or continu-
ously operated over several days,
add some Vaseline (not included) to
Air Tube Sealing Washer (13). This
will help reduce wear and ease and
obstructions in the Sprayer.
mAiNtENANCE ANd
SERViCiNG
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
Cleaning, maintenance, and Lubrication
BEFORE EACh uSE, 1. inspect gen-
eral condition of Sprayer. Check for
misalignment or binding of moving
parts, damaged or loose parts, dirt or
debris in Filter, and any other condi-
tion that may affect tool’s safe opera-
tion. do not use damaged equip-
ment.
AFtER uSE,
2. clean external surfaces
with clean, moist cloth.
CAutiON! Always depressurize
3.
system by squeezing Lever (41)
before performing any inspection,
maintenance, or cleaning.
Periodically,
4. lubricate all moving
parts of Arm (11).
to clean:
5. If using liquid chemicals,
flush the interior and clean the exte-
rior of the Sprayer and its Spray Gun
Assembly thoroughly with cleaning
agents recommended by the chemi-
cal manufacturer. Then, allow to air-
dry. do not use solvents.
When storing: 6. Always completely
empty Sprayer of liquid. Frost will
damage Sprayer if unit contains liq-
uid. Store Sprayer in an indoor area
such as a garage or shed.
CAutiON! make sure to store the
Sprayer and any chemicals in a
safe, dry, clean location out of
reach of children. Avoid storing the
sprayer in direct sunlight (which can
lead to possible UV degradation.)
CAutiON!
7. All maintenance, service,
and repairs not discussed in this
manual should only be performed by
a qualified service technician.