beautypg.com

Rear panel connections – Harman-Kardon DPR 1001 User Manual

Page 8

background image

8

REAR PANEL CONNECTIONS

REAR PANEL CONNECTIONS

¡ FM Antenna: Connect the supplied indoor (or an
optional external) FM antenna to this terminal.

™ AM Antenna: Connect the AM loop antenna sup-
plied with the receiver to these terminals. Connect the
black antenna wire marked GND to the top terminal
screw on the DPR with the grounding symbol.

£ Multiroom IR Input: Connect the output of an IR
sensor in a remote room to this jack to operate the
DPR 1001’s multiroom control system. (See pages 31
for more information on multiroom systems.)

¢ Remote IR Output: This connection permits the

IR sensor in the receiver to serve other remote con
trolled devices. Connect this jack to the “IR IN” jack on
Harman Kardon (or other compatible) equipment.

∞ Remote IR Input: If the DPR 1001’s front panel
IR sensor is blocked due to cabinet doors or other
obstructions, an external IR sensor may be used.
Connect the output of the sensor to this jack.

§ Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.

¶ Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.

• CD Inputs: Connect these jacks to the output of
a compact disc player or changer.

ª Multiroom Outputs: Connect these jacks to an
optional audio power amplifier to listen to the source
selected by the mulitroom system. (See page 31 for
more information on the multiroom system.)

‚ Video 1 Video Inputs: Connect these jacks to the
PLAY/OUT composite or S-Video jacks on a VCR or
other video source.

⁄ Video 1 Audio Inputs: Connect these jacks to the
PLAY/OUT audio jacks on a VCR or other video source.

ª

‹ fi

·

a

b

c

d

e

f

g

i

i

j

§

31

32

36

h

k

34

37

38

33

¡

£

¢

°

› fl

35

550W

SWITCHED 50W 0.5A MAX

SPEAKERS 8

LFE/SUB

FR

FL

LFE/
SUB

FR

FL

¡ FM Antenna
™ AM Antenna
£ Multiroom IR Input
¢ Remote IR Output
∞ Remote IR Input
§ Tape Inputs
¶ Tape Outputs
• CD Inputs
ª Multiroom Outputs
‚ Video 1 Video Inputs
⁄ Video 1 Audio Inputs

Video 1 Video Outputs

‹ Video 1 Audio Outputs

› Video 2 Video Inputs
fi Video 2 Audio Inputs
fl Video 2 Video Outputs
‡ Video 2 Audio Outputs
° Video 3 Video Inputs
· Video 3 Audio Inputs
a DVD Audio Inputs
b Digital Audio Outputs
c Surround Back/Multiroom Speaker Outputs
d Surround Speaker Outputs
e Center Speaker Outputs
f Front Speaker Outputs
g AC Accessory Outlets

h AC Power Cord
i Preamp Outputs
j LFE/Subwoofer Output
k Coaxial Digital Audio Inputs

Optical Digital Audio Inputs
DVD Video Inputs
6-Channel Direct Inputs
8-Channel Direct Inputs
Video Monitor Outputs
Video Monitor Component Video Outputs
DVD Component Video Inputs
Video 2 Component Video Inputs

38

37

36

35

34

33

32

31

12

To assist you in making the correct connections for
multichannel input, output and speaker connections,
all connection jacks and terminals have been color-
coded in conformance with the CEA standards
as follows:

Front Left: White

Front Right: Red

Center: Green

Surround Left: Blue

Surround Right: Gray

Surround Back Left: Brown

Surround Back Right: Tan

Subwoofer: Purple

Digital Audio: Orange

Composite Video: Yellow

Component Video “Y”: Green

Component Video “Pr”: Red

Component Video “Pb”: Blue

NOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may be
downloaded from the Product Support section at www.harmankardon.com.