haier ESA3067 - Manual (Page 11)

OFF FAN
COOL ON HIGH
LOW
MODE SPEED TIMER
POWER
ON/OFF
TEMP / TIME
MODE SPEED TIMER
POWER
TEMP / TIME
OFF FAN
COOL ON HIGH
LOW
MODE SPEED TIMER
POWER
ON/OFF
TEMP / TIME
OFF COOL ONLY
FAN ONLY ON HIGH
MED
DEHUM
ENERGY
SAVER LOW
ON/OFF
Every time you press the MODE button, it will change between FAN, COOL, ENERGY
SAVER and DEHUM. (See fig.#3)
9
After you plug in the unit, it will perform a self test. All the display lights will turn on
for 3 seconds. The LED display will read"88". If any display light fails to turn on you
may need service on the unit. After 3 seconds, the unit will automatically go to the
stand by mode. Now all lights will be off and you will have to turn"ON" by pressing
the On/Off key. After pressing"On/Off", the unit starts to work and enters the status
of "Fan" with the low setting. You will have to press the ( ) or ( ) key on the Temp/Time
to set the temperature at your desired comfort. You can choose a temperature between
61
o
F and 86
o
F. Once the temperature is set you can raise or lower it by pressing the
( ) or ( ) keys.The temperature setting can only be adjusted when the unit is in cooling,
energy saver, or dehumidifier. (See Fig. #2) Having set the temperature, you will set
the function of the air conditioner.