haier Household Frost Free Refrigerator HRF-396 - Manual (Page 10)

Operation
3.2 Freezer temperature setup
Every press of freezer button (effect when released) will result in 1 scale increase,
and one after another of freezer indicators will light from left to right until scale 5 is
reached (5 indicators on). If the button is pressed again, the cycle will start from
scale 1 (left end indicator on).
1.2 Indicator
3.1 Refrigerator temperature setup
a. Super freeze: the largest indicator lights on the top, super freeze mode
activated;
b. Refrigerator sensor 1 error: first one from left of refrigerator scale indicators
blinks at 1Hz
d. Refrigerator sensor 2 error: second from left of refrigerator scale indicators
blinks at 1Hz
e. Freezer sensor error: first from left of freezer scale indicators blinks at 1Hz
f. Defrost sensor error: second from left of freezer scale indicators blinks at
1Hz
g. Ambient temperature sensor error: third from left of freezer scale indicators
blinks at 1Hz
When the appliance is initialized, both refrigerator and freezer are set at scale 3
automatically with super freeze mode inactivated. If freezer sensor temperature is
between the points for turning on and off, the refrigerator will start operation when
temperature rises to the point for turning on.
Every press of refrigerator button (effect when released) will result in 1 scale
increase, and one after another of refrigerator indicators will light from left to right
until scale 5 is reached (5 indicators on). If the button is pressed again, the cycle
will start from scale 1 (left end indicator on).
2. Initial status requirements
3. Ordinary temperature setup control
Scale
Temperature