Harbor Freight Tools CENTRAL MACHINARY 41831 - Manual (Page 2)

Motor: 115V/60Hz. 2.2 HP
Cuts per Minute: 16,000
No Load RPM’s: 8000
Cutting Knives: 2, Bi-Metal, M-2 edge
Feed Rate: 23 feet per minute
Table Dimension: 12-9/16”L x 11-1/2”W
Table w/ Extension: 23-1/8”L
Sound Level: 98 DB
Cutting Capacity:
Length of unbutted stock: 8” minimum
Width of stock: 12-1/2” max.
Thickness of stock: 1/4” - 6”
Depth of Cut: 1/8” max.
Power Cord: 3-pole, UL approved
Overall Dimensions: 22” x 19-1/2” x 19”
Net Weight: 100 Lbs.
SPECIFICATIONS
INCLUDED ACCESSORIES
Open end box wrench (8mm x 10mm)
3mm, 5mm, and 6mm hex wrenches Carbon Brush set
Blade / Knife Gauge
FEATURES
1. Adjustable extensions to support long workpieces.
2. Anti-kickback safety devices to prevent workpiece from being ejected toward the operator.
3. Two hardened bi-metallic blades are fully adjustable and replaceable for powerful cutting performance.
4. Compact and lightweight machine which can plane workpieces up to 12-1/2” wide and 6” thick.
5. Positive adjusting table with crank handle and easy to read thickness gauge.
6. ON / OFF switch has removable safety lock device to prevent unauthorized use of the machine.
7. Integral circuit breaker protects the motor from burn out.
Page 2 SKU # 41831
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep both this manual
and your invoice in a safe, dry place for future reference.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.