Hamilton Beach Stay or Go Coffeemaker - Manual (Page 6)

6
Optional Features
(on selected models)
Permanent Filter
The Permanent Filter takes the place of
disposable paper filters. Simply place
the Permanent Filter in the filter basket.
Rinse the Permanent Filter in hot water
before first use. Clean the Permanent
Filter under hot running water and let
dry. Permanent Filter can also be
washed on the top rack of an
automatic dishwasher.
To Program Automatic Brew
1. Make sure clock is set for correct
time of day.
2. Press PROG button and digits will
flash.
3. Press H and M buttons until desired
brewing time is reached.
4. Press PROG button to confirm set-
ting. Digits will stop flashing and
return to set time of day.
5. Once brewing time has been set,
follow this procedure:
• Follow steps in “How to Make
Coffee.”
• Push AUTO-ON-OFF button once
and “Auto” will be shown in display
indicating the brew cycle will begin
at the set time.
NOTE: If AUTO-ON-OFF is pushed
twice, the light will glow and brewing
will begin immediately. Press AUTO-
ON-OFF once to turn off and once
more to set programming mode.
Water Filter
1. To replace, pull up on lid of filter
holder while
holding filter
base, turn
filter base to
allow filter to
drop out.
2. Before first use, soak water filter in
cold tap water for 15 minutes. Then
rinse under cold running tap water
for 15 seconds.
3. Insert filter in base. Snap lid onto
base.
4. Place filter and filter holder in
reservoir.
5. Replace after 60 brew cycles of cof-
fee. Set your replacement month by
aligning the arrow with the month
you expect will represent 60 brew
cycles.
840131500 ENv00.qxd 9/9/04 2:17 PM Page 6