Harbor Freight Tools 32222 User Manual

Page 10

Pulley Replacement

Step 1: Remove the SCREW (#29) and the BELT COVER (#57). (See figure 7.)

Pulley

(#54)

Screw

(#29)

Belt Cover

(#51)

Belt

(#56)

Pulley

(#55)

Figure 7 — Removing the Pulley

Step 2: Remove the BELT (#56).

Step 3: Replace BELT. Make sure is tracking properly on the PULLEYS (#54 & 55) by moving

carefully by hand.

Step 4: Replace the BELT COVER and tighten SCREW securely.

Brush Replacement

Both BRUSHES (#58) must be replaced at the same time. To remove the BRUSHES do the
following:

Step 1: Remove CHIP CHUTE COVER (#51).

Step 2: Remove both BRUSH CAPS (#59).

Step 3: Remove BRUSHES from BRUSH HOLDERS (#3) and replace with new BRUSHES.

Step 4: Replace BRUSH CAPS and CHIP CHUTE COVER.

Page 10 -- SKU: 32222