Harbor Freight Tools 43753 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. SKU 43753
5. Wear ANSI-approved safety goggles
and heavy-duty work gloves during use.
6. Inspect before use; do not use
if parts loose or damaged.
7. Observe work area conditions.
Keep work area clean and well lit.
8. Use the right tool for the job.
Do not attempt to force a small tool
or attachment to do the work of a
larger industrial tool. There are certain
applications for which this tool was
designed. Do not modify this tool and
do not use this tool for a purpose
for which it was not intended.
9. Stay alert. Watch what you are
doing, use common sense. Do not
operate any tool when you are tired.
10. Check for damaged parts.
Before using any tool, any part that
appears damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment and
binding of moving parts; any broken
parts or mounting fixtures; and any
other condition that may affect proper
operation. Any part that is damaged
should be properly repaired or
replaced by a qualified technician.
11. Replacement parts and
accessories. When servicing, use
only identical replacement parts.
Use of any other parts will void the
warranty. Only use accessories
intended for use with this tool.
12. Do not operate tool if under the
influence of alcohol or drugs.
Read warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.
13. For your safety, maintenance should
be performed regularly by a qualified
technician. Have qualified service
technician inspect this tool annually.
14. Only use this tool with
MacPherson struts. Do not use
with high pitched springs.
15. If spring coils do not compress
evenly, loosen the adjusting screw,
reposition the strut spring, and retry.
16. Before initial use, apply grease to
the Adjustment Bolt. Also, apply
grease periodically during use.
17. When reaching the maximum torque
(15 ft-lb) by tightening the Adjustment
Bolt, discontinue, and loosen the
screw. Reposition and retry.
18. Support vehicle on jack stands
before working on it.
19. Follow instructions and precautions
in vehicle’s service manual.
20. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations that
may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must
be supplied by the operator.