Harbor Freight Tools 43753 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 43753
Specifications
Capacity 7″ Coil Spring Diameter
Maximum Opening 8″
Lead Screw Torque 15 ft-lb minimum
Compressor Type MacPherson Struts Only
Save This Manual
You will need the manual for the
safety warnings and precautions, assembly
instructions, operating and maintenance
procedures, parts list and diagram.
Keep your invoice with this manual.
Write the invoice number on the inside of the
front cover. Keep the manual and invoice in
a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards.
Obey all safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety
alert symbol, indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
Safety Warnings
WARNING Read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
1. Tighten and release evenly and slowly.
Only use hand tools to tighten/release.
Do not use any air, electric, or impact
tools with this tool. Only operate this
tool with a 3/4″ socket and ratchet,
3/4″ combination wrench, or
other applicable hand tools.
Power, air, or electric tools may
compress the spring too
quickly, leading to injury.
2. Use provided pins to secure spring
in place before use.
3. Set compressed spring in safe area. Be
careful when spring is compressed. Do
not drop or jar spring. Doing so might
result in the spring forcefully flying free,
causing personal injury or damage.
4. Do not use on springs larger
than 7″ diameter.