Hitachi VM-E520A - Manual (Page 27)

Advanced Techniques - 27 -
AUTO and Date - Automatic Date Recording
This option records the date automatically once a day at the beginning of recording for ten seconds
Note: The camcorder records the same date when;
- the cassette is replaced.
- you select AUTO and date display again.
- the recording is less than 10 seconds long.
Note: If the date changes while recording continues over 10 seconds, the new date is recorded for about 10
seconds the next time you make a recording.
TITLE and Date - Automatic Title and Date Recording
This option records the date and created title (see "Creating and Recording a Title" on page 43) automatically
once a day at the beginning of recording for 10 seconds.
Note: When TITLE is displayed in the viewfinder, the title cannot be turned on or off using the remote
control.
Date - Date Recording
The camcorder records the date with the picture all the time.
No Display - No Date Recording
The camcorder does not record the date.
Date and Time - Date and Time Recording
The camcorder records the date and time with the picture all the time.
3. Press the start/stop button. Recording will start.