Harbor Freight Tools 47996 - Manual (Page 6)

Page 6 SKU 47996
NOTE: Some parts are listed and shown for illustration purposes
only and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT
OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Troubleshooting
The following lists possible causes for non operation:
1. Batteries are not inserted correctly.
2. Battery Cover not completely secure.
3. Batteries are dead.
4. On / Off Button was not pressed on.
5. Solar Cells are damaged. Replace Lens Filter unit.
6. Lens Filter is cracked. Replace Lens Filter unit.
Parts List
Item # Description Qty
1 Front Cover Protective Lens 1
2 Auto Darkening Lens Unit 1
3 Helmet Shell 1
4 Headband 1
5 Knob 1
6 Round Washer 1
7 Metal Washer 2
8 Limitation Washer 1
9 Hinge Screw 2
10 Lens Unit Screw Clamps 2
Replacing the Lens Cover
Lift the Lens Cover and remove the clear plastic. Replace it when it becomes scratched,
cracked, or pitted, and cannot be cleaned.
Removing the Lens
1. Turn the Helmet over to view the Lens from the inside.
2. Unscrew the two Lens Unit Screw Clamps (10). Pull it out from the inside.