Hafler 9180 - Manual (Page 5)

PERFORMANCE SPECIFICATIONS
GENERAL
INFORMATION
All specifications are for 20 Hz - 20 kHz, at full power into 8 ohms, unless specified otherwise.
Power Rating: 9180:
9270:
Rated THD:
Full Power Bandwidth:
Signal to Noise Ratio:
Input Impedance:
Input Sensitivity: 9180:
9270:
Damping Factor:
Slew Rate:
Controls:
Inputs:
outputs:
Power Consumption:
Size:
Weight: 9180:
9270:
105 watts per channel (8 ohms)
150 watts per channel (4 ohms)
300 watts mono (8 ohms)
135 watts per channel (8 ohms)
200 watts per channel (4 ohms)
400 watts mono (8 ohms)
less than 0.025%, typically 0.005% at 1 kHz
0.3 Hz to 116 kHz
greater than 100 dB, unweighted
47,000 ohms
1.4 volts RMS
1.6 volts RMS
300 to 1 kHz, 200 to 10 kHz
50 V/uS
Power Switch, Left/Right Gain Controls, Mono/Stereo Switch
Right and Left/Mono RCA jacks
Right, Left, and Mono 5-Way Binding Posts
100 watts quiescent, 1200 watts maximum
17”(W) x 12.5”(D) w3.5”(H) excluding feet, faceplate 17” or 19”(W)
43.2cm(W) x 31.7cm(D) x 8.9cm(H) excluding feet,
faceplate 43.2cm or 48.3cm(W)
33 Ibs., 15 kg, net.
35 Ibs., 15.9 kg, net.
-4-