beautypg.com

Accessory installation – Harbor Freight Tools 33171 User Manual

Page 7

background image

Page 7

SKU 33171

For technical questions, please call 1-800-444-3353.

ACCESSORY INSTALLATION

1.

Make sure the air supply is disconnected first. Insert the Collet (24) into the

Collet Nut (25). Then, thread the Collet Nut onto the Spindle (33) a few turns.

(See Figure A.)

2.

Insert the shank of the accessory upward into the flared end of the Collet (24).

3.

Place the small end of the Spanner (27) on the flats of the Spindle

(33). Place the large end of the other Spanner (27) on the flats of the

Collet Nut (25). Then, tighten the Collet Nut to secure the accessory in place.

(See Figure B.)

SPANNER

(27)

TIGHTEN

FIGURE B

SPANNER

(27)

COLLET (24)

COLLET NUT (25)

SPINDLE (33)

COLLET NUT (25)

COLLET (24)

(NOT SHOWN)

FIGURE A

SAFETY LE-

VER (39)

See also other documents in the category Harbor Freight Tools Tools: