Harbor Freight Tools 19.2V CORDLESS IMPACT WRENCH 97925 - Manual (Page 10)

Page 10 SKU 97925, 99676 For technical questions, please call 1-800-444-3353.
speCiFiCations
Drive Size
97925:1/2"
99676: 3/8”
Charger Input 120 V~, 60 Hz, 80W
Charge Time 97925: 1 Hour
Speed
97925: 0-2,000 RPM
99676: 0-2,500
Maximum Torque
97925: 350 ft-lb
99676: 200 ft-lb
Battery Cell Type 19.2 V, NiCd, 2.0 Ah
unpaCking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
list of contents
description Qty
Impact Wrench 1
Charger 1
Battery 1
Blow Mold Case 1
set up instruCtions
read the entire important saFetY inFormation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
to preVent serious injurY From aCCidental
operation:
turn the power switch of the tool to its “oFF” position and unplug
the tool from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
tool Features
Always make sure the Trigger of the Impact Wrench is not depressed, the Forward/ 1.
Reverse Switch is in the center, locked position, the Battery is removed from the
WARNINg