Harbor Freight Tools 97563 - Manual (Page 6)

Page 6 SKU 97563 For technical questions, please call 1-800-444-3353.
Figure 3
Safety Pin (9)
Cross Beam (6)
Upright Post (2)
Insert the Safety Pins (9) into Holes located in, and lined up with, both the Up-
right Posts (2) and Cross Beams (6). This is an important step and will keep the
Cross Beams from slipping up and coming loose (See Figure 3).
Lay the Steel Shelves (7) as needed into the Cross Beams (6). You can use up
to 15 Steel Shelves (7), three per level, or leave some out in order to make room
for taller items being stored.
Make sure all Steel Shelves are in correct and level positions.
tighten all nuts
(5) and bolts (1).
operating instructions
read the entire iMportant saFety inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
This Heavy Duty Storage Rack may be used to store items of different widths and
heights by removing any of the 15 Steel (7) Shelves. Each Shelf will support up
to 600 lb.
If needed, the Cross Beams (6) holding each shelf may be raised or lowered us-
ing procedures found in the “Assembly” portion of this manual on pages 5 and 6.
8.
9.
10.
1.
2.