Hobart Welding Products ARCSTAR 280 NT - Manual (Page 19)

OM-4402 Page 15
4-4. Connecting The Battery
Ref. 800 394-C / Ref. 198 912 / Ref. S-0756-D
+
–
3/8, 1/2 in
Y Connect negative (–)
cable last.
Tools Needed:
4-5. Installing Exhaust Pipe
801 681 / Ref. 198 912
.
Point exhaust pipe in desired
direction. If unit is truck or trailer
mounted, point pipe away from
direction of travel.
Tools Needed:
1/2 in
4-6. Connecting To Weld Output Terminals
Y Do not connect to CC and CV
terminals at the same time.
1 Work Weld Output Terminal
2 Stick/TIG (CC) Weld Output
Terminal
3 Wire (CV) Weld Output
Terminal
For MIG welding, connect work
cable to Work terminal and wire
feeder cable to Wire (CV) terminal.
For Stick/TIG welding, connect
work cable to Work terminal and
electrode holder cable to Stick/TIG
(CC) terminal.
801 943-B / Ref. 198 912
3 2 1