HP Ultrium tape drives Q1538-90925 - Manual (Page 26)

Sun Systems, Solaris 8, 9, 10 26
HP restricted
Values for the parameters for name are as follows:
densities>
4
There are four densities following in the parameter list.
n> 0x00
Creates a device file with compression disabled.
3> 0x44
The density code for data compression enabled by default.
density>
3
Density 3 (0x44) is the default for Generation 3 drives.
timeout>
All timeouts are in seconds
Parameter Value Meaning
target X X
specifies the SCSI ID (target) of the device.
lun 0
Specifies the LUN for the device.
Parameter Value Meaning