Harbor Freight Tools 91223 - Manual (Page 9)

SKU 91223 Page 9
Handle
The Grinder comes with a SIDE HANDLE (#29)
which can be screwed into either side of the
Grinder. (refer to Figure 1.)
Figure 1 — Attaching Side Handle
Installing Wheels
Warning:
Always disconnect from power source
before adding or removing accessories.
Use a cloth or glove to protect hands
from abrasion.
Figure 2 — Installing Wheels
Step 1: Using the WRENCH (#28) (refer to Figure 2), loosen the WHEEL NUT (#1) by turning it counter
clockwise.
Step 2: Place the new GRINDING WHEEL (#2) on the SPINDLE (#5) against the INNER FLANGE (#3).
Step 3: By hand, Screw the WHEEL NUT clockwise back onto the SPINDLE, then tighten with the
WRENCH.
Side Handle
(#29)
Wrench
(#28)
Wheel Nut
(#1)
Grinding
Wheel
(#2)
Inner Flange
(#3)
Spindle
(#5)