Hotpoint 18 - Manual (Page 9)

ShelfSaver ™ Rack
This slide-out rack holds twelve cans of
soda or two wine/water bottles (lengthwise).
Can be removed for cleaning.
To remove, slide the rack out to the stop
position, lift the rack up and past the stop,
and lift out.
About crisper removal.
www.Hotpoint.com
Not all features are on all models.
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
To Remove:
Lift the drawers up slightly while pulling
them past the stop location.
When the door cannot be fully opened:
Pull the drawer farthest from the door
straight out. Slide the other drawer toward
the middle and remove it.
To remove the glass cover:
Remove the glass, then the frame. When
replacing the glass, push the rear edge
firmly into the frame.
Push up the glass cover at the front.
Slide the glass cover forward until the
back edge comes out of the frame.
Rotate the side of the glass cover up.
Remove the glass cover.
To remove the frame:
Lift up the front of the frame using
both hands.
Slide the frame forward.
Rotate the side of the frame up.
Remove the frame.
2
4
3
1
About the additional features.
Not all features are on all models.
Removing the glass cover
2
4
3
1 1
Removing the frame
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
9