Hunter Fan UH68ODK - Manual (Page 5)

UH68ODK Tent Heater
Chapter 1
Introduction
Scope
Type of manual:
Operators
Model and Name: UH68ODK and UH68ODH, Forced air tent heater, with ducts.
Purpose of Equipment: Circulates heated air in the Alaska, TEMPER tent, and other soft
walled structures. Maintains temperature via room thermostat in the remote control
panel. Control panel also has diagnostic and operating LED’s.
General
The UH68ODK is Hunter model UH68G1modified for outdoor usage. The outdoor kit
may be field installed or factory installed. The UH68ODK burns all grades of diesel fuel
and JP8 to generate heated air. Fuel is pumped from remote tank to the carburetor,
drawn through the fuel jet by venturi action of the mixer nozzle, ignited, and burned in
the heat exchanger. A fan, capable of delivering up to 2 IWC static pressure, blows the
heated air into the tent. The UH68ODK has the following applications:
• Alaska tent, Temper Tent
• Medium and small soft wall shelters
Features
• Variable room temperature control
• Remote control with 20 foot cable
• Diagnostic LED’s on remote control
• Low voltage opto-isolated controls to eliminate shock hazard.
• “Fan only” ventilation.
WARNING!
ELECTRICAL SHOCK
Attempting to use an unmodified UH68 series heater outdoors
may result in electrical shock, injury or death
1-1