Hawking Technology HWUG1 - Manual (Page 20)

- 17 -
4.3.1 Configure the Profile (Add/Edit a Profile)
System Configuration
Parameter Description
Profile Name Define a recognizable profile name for you to identify the different
networks.
SSID The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of two co-located WLANs.
You may specify a SSID for the adapter and then only the device
with the same SSID can interconnect to the adapter. If you want to
add one of the networks nearby to the profile list, pull down the
menu, all the networks nearby will be listed and you can add one
of them to the profile list.
Power Saving Mode The power saving function is only available when the network type
is in Infrastructure.
CAM( Constantly Awake Mode) – The adapter will always be set
in active mode.
Power Saving Mode – Place the adapter into power saving mode
when it is idle.
Parameter Description
Network Type Infrastructure – This operation mode requires the presence of an
802.11 Access Point. All communication is done via the Access
Point or Router.