Electrical connections, English – haier WDNS201SS User Manual
Page 9
English
ELECTRICAL CONNECTIONS
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for the electric current. This appliance is equipped with
a cord containing a grounding wire and a grounded plug. The plug must be inserted into an outlet that
is properly installed and grounded.
• Improper use of the plug may result in the risk of electric
shock.
• Consult a qualified electrician or service technician if the
grounding instructions are not completely understood or if in
doubt as to whether the appliance has been properly
grounded.
Wiring Requirements
This appliance must be plugged into a 15Amp, 115 Volt, 60Hz GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal responsibility and
obligation of the consumer to have it replaced with a properly grounded three-prong outlet.
Extension Cords
We do not recommend the use of an extension cord with this unit.
Power Interruptions
Occasionally, there may be power interruptions due to thunderstorms or other causes. Remove the
power cord from wall outlet when a power outage occurs. When power has been restored, re-plug the
power cord into wall outlet.
8
Note: Your units come with a bottle secure bracket as seen in figure A. Use the bracket shown above
to keep the water bottle stable and tightly secured. This will help when the water level is low in the
bottle and avoid bottle wobbling. To use simply place the bracket inside the water bottle holding
receptacle as shown in figure B. Now place the water bottle on the cooler as shown in figure. D.
a.
b.
c.
d.