Hitachi P60X901 - Manual (Page 80)

80
Setup
Select The Quick Start Option
This feature will select QUICK START UP options. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UP feature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will
monitor
any changes and prepare the television to quickly
present a picture. A small amount of electricity is used
to continually monitor signals when this feature is
selected.
Reset The Software
Select The Quick Start O Option
Setup
Move SEL Select
Select ON to have the TV tune channels quickly at
1st turn on.
Select OFF to save electricity
Off On
This feature shows software information and easy
upgrade procedure. This function allows the TV
software
to be upgraded by using a flash card ( MMC/SD CARD).
If a future software upgrade is required for your TV,
HITACHI will notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. Insert MMC/SD CARD.
2. Press the CURSOR PAD
̆
or
̄
to highlight
UPGRADE NOW.
3. Press the SELECT button to select and start
upgrading.
4 . Unplug the AC power cord or press the
POWER button for 5 seconds (P60X901
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
Reset The Software
Setup
Move SEL Return
MMC Software Upgrade : Vxxxx.xxxx
Upgrade Now
before upgrading.
Reset TV Settings
No Yes
Reset TV Settings
This function allows you to Reset all TV Settings to the original factory settings on all modes during the next
main power off/on.
2. Press the SELECT button or CURSOR PAD ̈ to select Reset the Software Menu.
3. Use the CURSOR PAD ̄ to access the Reset TV settings option.
4. Select the " YES " option to Reset ALL the TV functions and unplug the AC cord or press the POWER button for
1. Use CURSOR PAD ̆, ̄ to highlight functions.
(Select "Yes" to return all settings
to the factory default after main power OFF/ON.)
NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes
when the AC cord is unplugged once or the POWER button is pressed for 5 seconds (P60X901 only).
Please Insert MMC card
2. When the Quick Start Option has been set to ON or TV Guide On Screen TM is configured, the option of
Reset TV Settings will not operate unless the AC cord is unplugged once or the POWER button is pressed
O
n
-S
c
re
e
n
D
is
p
la
y
OR
OR
Move SEL Select
Set The IR Out
Set The Closed Captions
Set The AV Net
Set The Inputs
Set The Screen Saver
Setup The Menu Options
Setup
OR
CableCARD Information
Select The Quick Start Option
Reset The Software
Move SEL Select
Set The IR Out
Set The Closed Captions
Set The AV Net
Set The Inputs
Set The Screen Saver
Setup The Menu Options
Setup
OR
CableCARD Information
Select The Quick Start Option
Reset The Software
only) when the UPGRADE is complete.
(Only P50X901 model: MAIN POWER button
OFF/ON operation can also complete
UPGRADE).
5 seconds.
3. (Only P50X901 model) MAIN POWER button OFF/ON operation can also enable this function.
for 5 seconds (P60X901 only).