Programming and reviewing settings and changes -13, Program review button select button enter button, Programming & reviewing – Heatcraft Refrigeration Products H-IM-79B User Manual

Page 12

1 2

PROGRAMMING AND REVIEWING SETTINGS/CHANGES

The

Program Review

button is used to program, review and change all program settings

for the system.

Press

“PROGRAM REVIEW”

button. The Setpoint item will appear on the LED. After a few

seconds delay the Setpoint value will display. Each time the button is pressed a different
setpoint item is displayed.

Next, use the

“SELECT”

knob to change value of Setpoint Item.

Next, When the desired value is selected, press the

“ENTER”

button to place it in program

memory. If the

“ENTER”

button is not pressed the value will not be stored in the memory

and thus will not be changed.

“PROGRAM REVIEW” ITEMS

A-E

Set Defrost type (

Air

ELE

)

rEF

Set Refrigerant type (R22, R404A or R507)

bot

Set Box temperature (-30°F to +70°F)

SUP

Set Superheat (4°F to 20°F)

SLA

Set Board as a Slave (Yes or No)

dFn

Set Number of defrosts per day (1,2,3,4,5,6,8,10 or 12 per day)

dFF

Set Defrost Fail-safe time (10 to 200 minutes)

dFt

Set Defrost End temperature (40°F to 100°F)

dFS

Set Defrost Delay Start Time (0.5 Hours to 23.5 Hours)

ALH

Set Alarm High temperature (-40°F to 90°F)

ALL

Set Alarm Low temperature (-40°F to 90°F)

ALt

Set Alarm time (2 to 120 minutes)

F-C

Set Fahrenheit/Celsius temperature units (°F/°C)

Programming & Reviewing