beautypg.com

Holman qt14 User Manual

Page 10

background image

IF FURTHER ASSISTANCE IS REQUIRED:
CONTACT STAR/HOLMAN FACTORY SERVICE TEAM AT 1-800-807-9054

8

4. Wipe exterior of unit with a damp cloth.

5. Wipe fan grills/air intakes (located on side of the unit) to remove any dust build up using a damp

cloth. Reassemble unit making sure crumb trays are properly installed. The crumb tray should
slide into the slot on each side of the area under the belt.

6. Clean the viewing window by removing the six thumbscrews on the rear of the sandwich

warmer. Remove the window trim ring. Then remove the window spacer. Then carefully remove
the Neo-Ceram glass.

7. Clean the Neo-Ceram glass using the mild soap. DO NOT use any abrasive cleaner or scrub

pad. A scratched glass is more easily broken and will get dirtier faster.

8. Re-assemble the viewing window by carefully placing the Neo-Ceram glass back in. Place the

window spacer with the flanged side against the glass in. Line up the six holes of the window
trim ring with six holes on the side of the warmer and re-install the thumbscrews.