Harbor Freight Tools 96514 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. ITEM 96513
Specifications
Capacity 1,000 lb. combined,
500 lb. individually
(Static Conditions)
Max. Tailgate Height 36″
Important Safety Information
1. Before use:
a. Read and understand manual.
b. Inspect before every use;
do not use if parts loose or damaged.
c. Turn vehicle’s ignition OFF
and set parking brake.
d. Clean dirt, oil and debris off
ramps and allow ramps to dry.
e. Unfold ramps completely.
f. Set up only on solid,
level, dry surface.
g. Turn ramps so flange end faces
downward. Position ramps so that
tongues fully contact tailgate.
h. Properly connect safety chains.
2. Load vehicle slowly.
Do not ride vehicle down ramps.
3. Do not exceed 500 lb. capacity per
ramp or 1,000 lb. capacity evenly
distributed across two ramps.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
4. Use safety chains as intended only.
5. Use ramps as intended only. Do not use:
a. as ladder(s),
b. to load/unload 3-wheeled vehicles,
c. if tailgate on carrying vehicle
is higher than 36″, or
d. to load vehicle with wheel
width wider than ramp.
6. This product is not a toy. Do not allow
children to play with or near this item.
7. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
8. All persons not involved in the
loading process must stand
clear of the loading ramps.
Keep children away. Children must
not be allowed in the work area.
9. Do not exceed tailgate capacity.
10.
Avoid working alone. If an accident
happens, an assistant can bring help.
11. Keep work area clean and well lit.
Cluttered and dark areas invite injuries.
12. Store idle equipment.
When not in use, store ramps in
a dry location to inhibit rust.