Front panel color change, The problem, How to change color – Hotpoint HDA959M User Manual
Page 14

The Problem
(continued)
PROBLEM
POSSIBLE CAUSE AND REMEDY
SUDS IN THE TUB
detergents are not meant for dishwashers. USE ONLY AUTOMATIC
DISHWASHER DETERGENTS
AVOID
To
remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon of
cold water to the tub. Close and latch the dishwasher. Pump out water by slowly turning
the control dial until a drain period is reached.
Repeat if necessary.
DISHWASHER LEAKS
Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s
designed for automatic dishwashers.
Spilling the rinse agent can cause foam during washing. This can lead to overflowing.
Wipe
up
spill of rinse agent with a damp cloth.
If you need more help.. call, toll free:
GE Answer
consumer information service
How to change color
Your dishwasher comes with a
A wood panel trim kit contains
Note: Do not operate dishwasher
reversible front color panel. You
trim and instructions for adding a
while changing panels or when
may purchase other reversible front
decorative wood door panel and
lower access panel is removed.
panels from your dealer or
lower access panel to match kitchen
Appliance Parts Mart.
cabinets. You may purchase this
The available selection is:
kit,
from your
or
White/Almond . . . . . . . . . .
Appliance Parts Mart.
Coffee/Avocado . . . . . . . .
Harvest/Black . . . . . . . . . .
To change color panels:
1. Take out two screws from door
and two screws from access panel.
Then remove the side trims from
either side of the dishwasher.
2. Slide out the panels and
replace them with the color you
want in front.
3. Replace the side trims.
14