beautypg.com

Step 6, Options, Button selection – Hotpoint WMA22 User Manual

Page 7: Energy saver, Rinse hold, Super rinse, Automatic features

background image

Options

STEP 6

Button Selection:

To select an option, press the button and you will see a light come on above the button.

Press again to cancel, and the light will go out.

You cannot alter the options once the machine is running.

Energy Saver...

use this option to...

Save money and time on lightly soiled loads.

This is not available with Quick Wash, Rinse and Spin or Spin

only programmes.

Rinse Hold...

use this option to...

Help reduce the creasing of delicate or synthetic fabrics by

holding clothes in the final rinse water.

The ‘Rinse Hold’ option light will flash to indicate that the

programme is holding the clothes in the final rinse water.

Complete the final spin by pressing the ‘Rinse Hold’ button

when the light is flashing..

This is not available with Wool or Spin only programmes.

Super Rinse...

use this option for...

Large wash loads and items for young children or people with

sensitive skin.

This option increases the water level of the first two rinses.

This is not available with Cold Wash, Rinse and Spin or Spin

only programmes.

NOTE: Remember to cancel buttons after use!

Automatic Features...

Auto half load

Auto half load saves you time and money when washing smaller loads.

Water levels are automatically adjusted to cater for the different loads.

Unbalanced load warning

Your machine has an inbuilt feature to prevent it spinning with an unbalanced load. This will minimise excessive vibration and

prolong the life of the machine. Before each spin the machine ‘senses’ the load within the drum and if the machine considers the

load to be unbalanced, it will not automatically spin. Instead the machine will try to redistribute the load to achieve balance by

tumbling backwards and forwards. If it is unable to balance the load after the fifth attempt the machine will abort the spin process

and the load will still be wet at the end of the programme.

If this safety feature is encountered you can spin the load after first opening the door, redistributing the load and selecting a fast or

slow, spin only programme. In the case of small loads or single items you may try adding some extra items of a comparable size to

help balance the load.

This manual is related to the following products: