HONDA Outboard Motor BF115A - Manual (Page 63)

61
MAINTENANCE SCHEDULE
SERVICING YOUR OUTBOARD MOTOR
Distributor’s Limited Warranty
ITEM
Perform at every indicated month or operating
hour interval, whichever comes first.
REGULAR SERVICE PERIOD
After use
Every 2 years
or
400 hrs.
Engine oil
Gear case oil
Engine oil filter
Timing belt
Balancer belt
ACG belt
Throttle linkage
Idle speed
Valve clearance
Spark plug
Propeller and Cotter pin
Anode
Lubrication
Check level
Change
Change
Replace
Check-adjust
Check-adjust
Check-adjust
Check-adjust
Check-adjust
Check-adjust
Check-adjust
Replace
Check
Check
Grease
Each use
First month
or
20 hrs.
(2)
(2)
(2)
(1)
Every 6 months
or
100 hrs.
(2)
(2)
(2)
(1)
Every year
or
200 hrs.
(2)
(2)
(2)
(2)
(2)
(3)
Follow the MAINTENANCE SCHEDULE table and service your outboard motor accordingly. Please note, a claim for
warranty coverage will not be denied simply because the maintenance schedule for your outboard was not followed.
However, any part(s) that fails specifically due to lack of maintenance, or improperly performed maintenance, would
not be covered under the .
When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
For professional/commercial use, log hours of operation to determine proper maintenance intervals.
These items should be serviced by an authorized Honda marine dealer, unless you have the proper tools and are mechanically proficient.
Refer to the Honda shop manual for service procedures.
Lubricate more frequently when used in salt water. (1)
(2)
(3)
(4)
05/08/24 09:32:23 31ZW5601_062