Hawking Technology HNC320G - Manual (Page 85)

85
F. Xplug Control Installation
Installation To Web Server
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu, select “System” and under the “Loading ActiveX From” input web server
location
(
http://www.web server location.com/ ).
Once the settings are completed the user now is able to access the network camera from the web browser by selecting the
image view – ActiveX mode.
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0. It must be
installed to a Public Domain with a Fixed IP address.