Procedure selection method – haier HWM8000 User Manual

Page 15

Times of pushing the
SELECT button

Push the SELECT button for 6 times, and it will resume the initial mode. It will circulate in that sequence.
The SOAK procedure can work in cooperation with automatic programs like standard and night. There is
intermittent pulsator stirring during soak.

Selected procedure

Applicable circumstance

Contents (the lighted indicators
indicate the programs about to run)

Spin

(spin after drain)

WASH

(the washing liquid

remains in the tub)

When the common laundries need
washing, rinsing and spinning.

SOAK WASH RINSE SPIN

Repeat using the washing liquid

When the laundries need only

spinning after manual washing (first

drain then spin)

The laundries are very dirty, or the

sleeves and collars of the shirt are

very dirty. First soak then wash.

5 Push the WATER LEVEL button to select suitable water level

4 Push the WATER INLET button to select water inlet mode

After the power is switched on, the washing machine will execute fuzzy program automatically to detect the cloth. After
defection, it can set the water level automatically. To select other water level, push the WATER LEVEL button to set the
water level. Refer to WATER LEVEL in Page 10 for selection.

After the power is switched on, the washing machine will set to COOL WATER inlet mode automatically. To
select WARM WATER only or both COOL WATER and WARM WATER, push the WATER INLET button to make
selection. See to WATER INLET in Page 10 for details.

WATER

LEVEL

Page 9

Page 10

WASH - SPIN

RINSE - SPIN

WASH - RINSE

(the rinsing liquid

remains in the tub)

SOAK - SPIN

When prevent the laundries from

corrugating, and the laundries do not

need spinning

SOAK WASH RINSE SPIN

Page 10

7 Push the RESERVE button to select suitable reserve wash program

6 Push the CURRENT button to select suitable water current

After the power is switched on, the reserve program is set to off mode automatically. If you need to set the washing
procedure to be finished at reserved time, please push the RESERVE button to set the reserve wash program. Refer to
RESERVE BUTTON in Page 11 for selection.

After the power is switched on, the washing machine can set the current automatically according to the laundries. If you
need to select current by yourself, please push the CURRENT button.
Refer to CURRENT in Page 10 for details.

When the RESERVE function is activated, the indicator of the program you have set will be
off. The RESERVE (HOUR) and TIME REMAIN indicators will be on. During reserve
procedure, you can push the RESERVE button to display the reserve mode.
To change the running program or cancel the reserve setting, you need to switch off the
power and make new selection.

The washing will be finished after 18 hours.

Confirm the operation of reserve program

Page 10

RESERVE

Reserve time from 2 to 24 hours

When the laundries need rinsing
And spinning after manual washing

Procedure selection method