HP PB360T - Manual (Page 40)

31
Self-Timer/Burst Mode
Your camera features a Self-timer and Burst which can be set in the Self-timer/ Burst function.
The Self-timer allows you to take photos after a pre-defined delay. While burst lets you take
consecutive shots. This function is only available in recording still images. The Self-timer/ Burst
setting is automatically set to off when you turn off the camera.
The table below shows the available Self-timer/ Burst settings
Icon Item Description
Off Captures an image without time delay.
10
10 Sec Self-timer
Sets a 10-second delay to capture image after pressing the
shutter button.
2
2 Sec Self-timer
Sets a 2-second delay to capture image after pressing the shutter
button.
Burst
Performs continuous shooting when the shutter button is pressed.
Stops shooting when the shutter button is released.
AEB
Automatic Exposure Bracketing (AEB) captures the same image
with three different exposure settings: standard, under, and over
exposure.
Hi
Speedy Burst Continuously captures the same image twelve times.
AF Lamp
The AF Lamp function allows you to record images even in
low light conditions.
If the AF Lamp is set to Auto, then the AF lamp located in the
front of the camera, see “Front View” on page 1 , emits a
red light by half pressing the shutter button. This assists the
camera to focus more accurately.
Auto
Off
AF Lamp
1/1