Harbor Freight Tools CentalPneumatic Coil Roofing Nailer 68024 - Manual (Page 14)

Page 14 For technical questions, please call 1‑800‑444‑3353. SKU 68024
5. If the tool requires more force to
accomplish the task, verify that the
tool receives sufficient, unobstructed
airflow (CFM) and increase the pressure
(PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND
ACCESSORY FAILURE, RESULTING
IN INJURY: Do not exceed the tool’s
maximum air pressure rating.
If the tool still does not have sufficient
force at maximum pressure and
sufficient airflow, then a larger tool may
be required.
Note: While working on roofs, tar and
dirt may build up on the Nose of the
Roofing Nailer. This can prevent normal
operation. Remove buildup with a
nonflammable solvent. NEVER use
gasoline or other flammable solvents.
Do not immerse the Roofing Nailer in
an approved solvent beyond the height
of the nail heads, to avoid getting the
solvent into the drive cylinder of the
tool. Dry off the Roofing Nailer before
use; any oil film left after cleanup will
accelerate tar buildup.
6. After use, to prevent accidents:
a. Release the trigger.
b. Detach the air supply.
c. Attempt to fire the Tool into a piece
of scrap wood to ensure that it is
incapable of firing any fasteners.
d. Release the trigger again.
e. Clean external surfaces with clean,
dry cloth.
f. Store indoors out of children’s reach.