Hotpoint HDA950G - Manual (Page 5)

●
For
b.
c.
Load clean plates and dishes to
be warmed.
Select DRYING HEAT–ON
drying option.
the door unlatched.
d. Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
e. Latch the door to start the cycle.
in each cycle
Cycle selection
It is important to follow the loading
instructions on pages 8 and 9.
PANS—For items such as
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes
that have been pre-rinsed before
loading. Also, for washing
lightly
soiled dishes with soils
that have not dried on.
HOLD—For rinsing
partial loads which will be washed
later. Select DRYING
OFF drying option.
PLATE WARMER—For warming
clean dishes and serving plates for
the serving of hot food.
Minimum
Wash
Water Use Cycle Time
wash
minutes) Sequence
m& PANS 12.9
4’*
11.0
45*
LIGHT 9.5 45*
HOLD 5.3 17
*WATER BOOST-ON:
The timer will not advance until
water reaches proper temperature.
(See WATER
option
*DRYING HEAT—ON:
Add 21 minutes.
●
You’ll hear occasional clicking ●
During the drying period:
sounds:
—The motor stops.
—Soft food disposer shredding
—Water vapor is released through
action.
the vent under the door handle.
—Drain valve opening to pump It maybe visible.
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
5
h
i
.
I
m
m
i
■