HP T250 - Manual (Page 83)

6.5.13 Memory
Use this setting to select data storage location. If a single memory
card is inserted, it will be automatically selected by default. This
setting should only be used when 2 memory cards are inserted.
1. Power on the camcorder.
83
2. Touch the icon or press the Menu Button ( ) then
touch the Settings icon . Touch the Memory option to
display the submenu.
3. Touch the desired option. SD1 is the SD/SDHC memory card
slot and SD2 is the micro SD card slot. If you select a card
source that does NOT have a memory card inserted, a “No
Card” prompt will briefly be displayed.
Note: Power off the camcorder before inserting a memory card to avoid
damage and loss of content on the card. When inserting SD card, slot
1 or slot 2 can be selected for storage. If the camera does not have SD
card, the file will be stored in the build-in storage.
4. Touch the icon to exit the Menu mode.