Harbor Freight Tools 92500 - Manual (Page 2)

SKU 92500 For technical questions, please call 1-800-444-3353 PAGE 2
pRODuCT speCIFICATIONs
Electrical Requirements 110 V~, 60 Hz, 2 A
Indicators Red LED - Power
Green LED - Ready
External Fuse 3.15A250V Glass Tube
Motor Synchronous
Power Plug 3 Prong, Grounded
Maximum Laminating Width 12”
Maximum Document Thickness .6mm (.024”)
Maximum Film Thickness 0.0030”-0.0040”
Laminating Speed Approx. 12” Per Minute
Heat Dial Increments 1 To 10
Warm Up Time 5 to 10 Minutes
Maximum Temperature 350° Fahrenheit
Overall Dimensions 18” L x 8-1/4” W x 4” H
Weight 8.4 Pounds
uNpACKINg
When unpacking, check to make sure all the parts shown on the parts List on page
11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
sAVe THIs MANuAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
geNeRAL sAFeTY RuLes
WARNINg!
ReAD AND uNDeRsTAND ALL INsTRuCTIONs
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVe THese INsTRuCTIONs
WORK AReA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents. Keep the work area well lit. Always keep the work area free of obstruc-
tions, grease, oil, trash, and other debris.