Hitachi CP-X308 - Manual (Page 54)

54
q
e
w
3 .7 Start the “Live Viewer 3”
When you get the connection between your projector and PC, the “Live Viewer 3”
main menu will be shown on the PC screen.
On the main menu you can configure the settings and operate the functions to
send your images to the projector in the Live Mode.
1) Menu Type
There are 2 type of the main menu, Easy type and Advanced type, which can
be switched on screen.
3 .7 .1 Main menu and Operating buttons
• When the “Live Viewer 3” is started, the last used type will be screen.
• When the network connection is not established, the Advanced type will be on
screen.
Switch to Advanced type
Easy Type
o
i
u
y
t
Advanced Type
a
Switch to
Easy type
Status Display
r
Fig. 3.7.1 a Live Viewer 3 Main menu
2) Operating buttons
q
Starting Capture button
The transmission to the projector is started and the images will be displayed
in the Live Mode.
The Display mode will be the Single PC mode at first. After that, the last
Display mode will be applied.
w
Stop button
The image transmission is stopped.
• The images may not be displayed on screen, if the Start/Stop buttons
are clicked repeatedly.
NOTE
3 . Using the Live Mode
Indicator