Hamilton Beach 64695N - Manual (Page 5)

5
Mixer Release Button
Use this feature to lock the mixer in
the “down” posi-
tion when using
on the stand.
Shift and Stir ™ Bowl Lever
Use the lever to move the turntable.
This allows you
to position the
beaters near the
edge of the bowl
or in the center
for better mixing
performance.
Using Your Mixer
1. Always make sure mixer is unplugged
and OFF before inserting beaters,
using as a hand mixer or assembling
on the stand.
2. Plug mixer into electrical outlet.
3. Move the speed control to desired
speed, starting at 1 and increasing to
a higher speed as necessary.
4. If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
5. When finished mixing, move the
speed control to OFF and unplug
mixer.
6. To eject beaters, push straight down
on the speed
control.
NOTE: Always
detach beaters
before remov-
ing mixer from
the stand.
7. To remove mixer from stand, hold
mixer and press mixer release button.
Pull mixer to release from stand.
Optional Features
(available on select models)
Burst
Press and hold down the button for
additional power at any speed.
NOTE: Never use Burst for more than
two minutes at a time or motor may
overheat.
Bowl Rest ™
This feature can be used on most large
mixing bowls.
Use the Bowl
Rest while adding
ingredients or
checking a
recipe. To use,
TURN MIXER
OFF, then set
the mixer on the
edge of the bowl.
NOTES:
• Never use Bowl Rest when mixer is on.
• Do not use Bowl Rest on small
(1 1 ⁄
2
quart) mixing bowls or plastic
mixing bowls.
Bowl Lever
840163500 ENv03.qxd 4/30/07 1:43 PM Page 5