Hobie I12S - Manual (Page 3)

HOBIEKAYAKS.COM
2
Sit-on-top Cockpit
Hobie Mirage kayaks are open-top cockpit designs. This
allows the kayaker to enter and exit the kayak easily from
the shore, dock or water. Scupper hole(s) make the kayak
self-bailing. The design also eliminates the need to perform
an “Eskimo roll” (advanced kayak technique).
Scupper Hole(s)
Drain holes (scuppers) in the cockpit or cargo well will allow
any water that enters the cockpit to immediately flow back
out.
Patented Inflatable Hull Design
The Hobie Mirage Inflatable line of kayaks uses a patent
pending drop stitch construction to give performance that is
comparable to a hard shell kayak. The black material along
the bottom is stretched tightly to give you a fair hull shape
for maximum performance. It is important to know that the
bottom surface creates a bilge area inside the kayak that
can collect water if punctured, but the kayak will not sink.
See the draining instructions later in this manual.
Maneuverability
All Inflatable Mirage Kayaks come with the (patented) Twist
and Stow rudder system which comes pre-installed by our
factory. This new rudder is designed to flip out of the way
during land transport. It has an optional larger rudder blade
for more turning authority with the kayak sailing option.
Durable PVC Construction
Hobie Inflatable kayaks are made from a durable PVC to
continue Hobie’s tradition of quality, long-lasting products
that will give you years of enjoyment.
Hobie Mirage i14t w/ Sail
About the Design of your Kayak