Harbor Freight Tools 94071 User Manual
Page 5
21.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
22.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
23.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
24.
When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
Avoid serious eye injury. ALWAYS wear ANSI-approved safety impact eye
glasses underneath an ANSI-approved safety impact full face shield when
operating the Grinder.
2.
Dress safely. Do not wear loose clothing or jewelry as they can become caught
in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing long-sleeve shirt, roll sleeves up
above the elbows.
3.
Make sure the Power Switch (7) is in its “OFF” position before plugging the
Power Cord/Plug (13) into an electrical outlet.
4.
Do not abuse the Power Cord/Plug (13). Do not pull the Power Cord to
disconnect the Plug from an electrical outlet. Do not move the Grinder with the
Power Cord/Plug in the outlet. Keep the Power Cord/Plug away from heat, oil,
sharp, edges, and its own Buffing Wheel (39) and Grinding Wheel (40).
5.
Never leave the Grinder unattended while it is running. Always turn off the
tool, unplug the tool from its electrical outlet, and wait until its wheels stop
rotating before leaving the area.
6.
Never use the
sides
of the Grinding Wheel (40) to grind objects.
SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 5