Hughes & Kettner CF 200 - Manual (Page 5)

TECHNICAL DATA
Output power per channel: 70W at 8 ohms, 1 OOW at 4 ohms
Input sensitivity: 1 V eff /0 cl bv
l
Stereo mode - 6dBV / 0.63 V eff
l Bridge mode ) dBV/! V eff
Input impedance: 50 kohms
IMPORTANT SAFETY INSTRUCTIONS!
BEFORE CONNECTING, READ INSTRUCTIONS
1.
2.
3. .
4.
5.
6.
7.
8.
Y.
Read all of these instructions
Save these instructions for later use
Follow all warnings and instructions marked on the product
Do not use this product near water
D o not place this product on an unstable cart, stand or table. The product may
fall. causing serious damage to the product.
Slots and openings in the cabinet and the back or bottom arc provided for
\ entilation to ensure reliable operation
of
the product and to protect it from
overheating these openings must not be blocked or covered. This product should
not be placed in a built-in installation unless proper ventilation is provided.
This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available consult your
dealer or local power company.
‘I his product is equipped with a 3-wire grounding type plug. a plug having a third
pin. This plug will only tit into a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the purpose of the grounding type plug.
Do not allow anything to rest o n the power cord. Do not locate this product
w here persons will walk on the c o r d .