Harbor Freight Tools 34313 - Manual (Page 7)

Step 3: Assemble with two BOLTS (#G) and two NUTS (#H) using the holes in the DETACH-
ABLE SIDE RAIL and BED FRAME. Tighten the NUTS.
Step 4: Attach a SIDE RAIL BRACE (#C2) to the inside vertical folded edges of the corner of
the Carrier Assembly as shown in Figure 5. Attach with two BOLTS and two NUTS.
Tighten the NUTS.
Bolts
(#G)
Bolts
(#G)
Nuts
(#H)
Side Rail
Brace
(#C2)
Side Rail
Brace
(#C2)
Figure 5 — Attaching Corner Side Rail Braces
Step 5: Repeat Step 4 for the other corner of the Carrier Assembly.
Step 6: Repeat Steps 1 through 5 to assemble the second DETACHABLE SIDE RAIL.
Your Excess Cargo Carrier is ready for use.
Page 7 -- SKU: 34313 REV 09/02
®