Harbor Freight Tools 34313 - Manual (Page 4)

UNPACKING
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Ref Item Description Quantity
A Receiver Mounting Bar 1
N/A Hardware Bag 1
B Detachable Side Rail 2
C1 Side Rail Brace 3
C2 Side Rail Brace 3
D Bed Frame 1
ASSEMBLY
Step 1: Place all the pieces for your Excess Cargo Carrier onto a clear work area.
Step 2: Make sure the set of three holes in the RECEIVER MOUNTING BAR (#A) are oriented
vertically. Turn the RECEIVER MOUNTING BAR to properly orient it.
Step 3: Insert the RECEIVER MOUNTING BAR (#A) under the mesh screen of the BED
FRAME (#D) and between the arched Bed Frame Supports as shown in Figure 1.
Bed Frame
(#D)
Receiver
Mounting Bar
(#A)
Figure 1 — Attatching the Mounting Receiver Bar
Page 4 -- SKU: 34313 REV 09/02
Caution: Be aware of the possible risk of fire and damage to property resulting from the
vehicle’s exhaust pipe pointing at the cargo put in this Cargo Carrier. Before installing the Cargo
Carrier, check to make sure that the exhaust pipe is not pointing in the direction of the cargo.
Flammable cargo can ignite from exposure to heat. Other cargo can be damaged from the heat.
Always be aware of this potential danger, and never use the Cargo Carrier if this risk exists.
REV 10/02